Sigma Middle East labels- Rising from humble beginnings.

UAE or the United Arab Emirates consists of seven independent city-states or emirates: Abu Dhabi, Dubai, Sharjah, Umm al-Quwain, Fujairah, Ajman, and Ras-al-Khaimah. Total population of all the emirates of UAE put together is much less than that of New Delhi India at 11.42 million with only 20% Emiratis and rest are expats making it the highest percentage  of  expatriates in any country in the world. The Indian expatriate population at 28% is the largest group in UAE. It is surprising that there is a substantial number of label printing companies there with more printers joining in year after year. In the start of the new Millennium, one could count the total number of label printing companies to around 10 which has now grown to over 40. Even though leading printers speak of intense competition and depleting margins yet there is a steady news of expansions and new companies joining the bandwagon of label printers. Obviously, it is not the local demand but due the business environment, conditions and facilities, the printing companies reach out to customers not only in the Middle East but also to Africa, Europe, and USA. It is a global hub from where they produce and export. It is normal to hear label printers in the region expressing difficulties due to a small market and intense competition, in such a situation it is heartwarming to see someone who comes from a fragile financial status, jumping into label printing and starting to register smart growth. One such person is Jagannath Wagle who endeavored to take the risk of setting up from virtually nothing, his maiden label venture, Sigma Middle East Labels that has started rising from humble beginnings.

Jagannath Wagle

It is rare to find humble people these days. Humility is putting pride behind, staying grounded to reality, have faith in oneself and learning from one’s modest beginnings to continuously move ahead with firm resolve and keep evolving. That is how Jagannath Wagle talks with respect and nostalgia about his humble background and times when he was growing up. this: As if living with his parents in a one 300 square feet room flat in Mumbai’s western suburb Nala Sopara along with two brothers was not crowded enough, to help the son of a family friend in village, his mother brought the boy to Mumbai to stay with them.” Jagannath’s father, an auditor with the government of India’s audit department had to manage within the meagre means to support a family of 6 people living in one room. However still they managed to impart the right education to all the children. Jagannath’s mother was a homemaker in true spirit, managing the household and the children by taking home tuitions, he reminisces fondly about her being an excellent cook.

Jagannath Wagle studied up to class 10^th in Little flower English school in Nala Sopara followed by joining father Agnel technical college in 1992. Unfortunately, due to Mumbai riots in 1992 he could not attend college, had to drop a year, and later joined an institute in Vasai to complete the secondary school education. Later he wished to join an engineering college but could not afford the capitation fee demanded by institutes those days so as an alternative he studied to graduate with B.Sc. degree in Physics from Mumbai University in 1998. Due to the financial stress, a relative in Delhi suggested for him to join the Coast Guard but his mother did not relent as she wanted him to study further. He finally went on to get a B.Sc. (tech) degree that was equivalent to an engineering degree. Thereafter he started making applications for job in various organisations and also to start with, he accepted a job with a relatively small company TechGyan at a meagre salary of Rs.4000.00 per month (Approximately 55 dollars). He had a lot of interest in computers so had acquired knowledge about them and as a business to augment his earnings he started assembling computers for customers on job work basis charging Rs. 2000.00 per computer. He had already catered to almost 50 customers. At this time, he started getting interview calls from companies like HDFC, Wipro and Reliance. He was excited that he got selected in Reliance at a salary of Rs.18000. per month to start with. It is strange and a matter of kismet as to how life leads you to your eventual Karma Bhoomi, the land where one eventually works or performs his life’s deeds, this is as expressed in Indian literature. Before Jagannath could join Reliance, his family got a call from his mother’s brother in Dubai who had been tricked by someone to invest in a label manufacturing unit, knowing nothing about labels and he needed help. He requested the family to send Jagannath to Dubai.

Ajman

Like any young man Jagannath also had aspired to work in distant lands like Europe and USA but for the Dubai offer by his uncle, he was hesitant as he knew nothing about labels, his knowledge was limited to computers and engineering. His mother impressed upon him to go to Dubai and support her brother who needed help and who else he could rely upon except family at this time.  The decision was made and on 28 January 2004 Jagannath Wagle landed in UAE which everyone impulsively refers to as Dubai due to its being recognized as the face of UAE. He started to work with his uncle in Ajman, as a salesman on a salary of 1500 Dirhams per month. Though he started as salesman, but his job profile eventually became all in one, heading the label business with a team of only 3 persons just like a startup entrepreneur. Jagannath knew that with UAE having one of the highest per capita income, it would be expensive and difficult to manage in the income promised and more difficult if he got married. To make success of his career he plunged head on into the business he had no knowledge about. Customers and suppliers became his teacher and taught him all about plates, cylinders, color management etc. he was a fast learner. A business that was 10000 Dirhams per month when he joined and his uncle was pumping in money each month to sustain expenses, became 100,000 per month  in just a year’s time, all this with just one two color small tacky boy press. Any label printer will understand the  effort that must have gone into achieving this.

Pooja Wagle

In 2005 Jagannath convinced his uncle that to remain in business they needed another machine. A used 1980 model 7” 3color Mark Andy 830 was acquired. In today’s time of advanced servo driven modular presses that equipment sounds irrelevant yet by 2007 he was able to reach a sale of 350,000 Dirhams per month by working 24 hours every day, the Tacky boy press became redundant. Jagannath’s salary was enhanced to 3500 and he got married to Pooja from Bohisar in Mumbai. Pooja also came from a very humble background, the father having passed away, her mother taught children of poverty-stricken people. She was working as a credit card salesperson with ICICI bank. They came in contact through a matrimonial website and the marriage was arranged by parents with the couple having never met each other. Once married the couple faced financial stress and there was need to move up in life.

Part of Sigma old factory shed

There was no scope for further expansion with the existing Mark Andy 830 press, discontent crept in, Jagannath contemplated on starting on his own or returning to India, but his wife Pooja put her foot down that there was no way she will go back to India and bring up her children there. Meanwhile Jagannath’s cousin had joined the label business and took over the management. Jagannath decided to initially start his own trading business of making non adhesive liners for cores. Having no money to start manufacturing himself he started out sourcing converting also from his uncle’s company for whom he was working. He was so respectful toward his uncle because of whom he was in Dubai and had indulged in learning the label business, that he made sure not to touch any customer who was buying from them. He even kept working simultaneously with uncle during the day and after office hours for his trading business because he wanted to let his cousin to complete his MBA before he left that business completely. Once free Jagannath decided to get full-fledged into labels but making sure he never touched his uncle’s customers. He started getting his jobs done from a company called German labels and as luck would have it sometime later the owner of that company decided to quit business and sell the machine.

Old factory shed

Jagannath wished to buy that press but did not have the funds, so he requested the owner to accept instalments, fortunately as he was destined, the owner agreed to handover the press with 50% down payment and 50% in 6 months. Now the 50% down payment was also not there but a determined Jagannath Wagle refused to give in. In due course of time his two brothers and the friend who lived with him in Nala Sopara had all moved to Dubai and were in good jobs. They all came to rescue and pooled in money to help him buy the Mark Andy. The trade license he took in 2009 was converted to a manufacturing license in 2010. So, in January 2010 Sigma Middle East Labels Industries LLC  started their maiden venture operating with a 250mm preowned Mark Andy 830 press in an 1100 square ft shed in Ajman with just one operator and a helper. Hard work and sheer perseverance produced good results and at this time a difficult situation cropped up. The only operator he had met with an accident and in emergency had to go to India. It was during the Eid period when business is at a peak in UAE, not being the one to be left behind, Jagannath himself operated the printing machine for the next three months. When a container of stocks arrived, he and his only helper would unload and moved goods into the shed and stack them. As at that moment he could not afford help and this incident will always keep him grounded to reality. Watching him make the gigantic offer many suppliers came forward to support him. He is extremely appreciative of Ajay Mehta of SMI Coated products for his support in supplying material on credit to his start-up venture.

Multitec

In 2012 when his sales from just one press reached 150,000 to 200,000 Dirhams per month, it was time for Sigma to move on to the next level and acquire another bigger press, he wished to install a European brand, but paucity of funds made him decide on an eight color all UV Multitec 330mm label press which was installed in 2013. It was his first modular press and was a big jump for Jagannath. Even though he lost some money initially as his costing was not right but soon, he took corrective steps towards growth, “This was my biggest learning curve” says Jagannath. 

Bobst at New Premises

Two years down the line in 2015 a jubilant Jagannath fulfilled his dream of acquiring a European label press, a Gidue MX370 , 8 color all UV, 1 die station, delam-relam, cold foil and lamination was installed along with and some more additional equipment, also adding more shopfloor space. The fast unplanned expansion led to problems in cash flow and in 2016 Sigma ran into financial stress and troubles. Payments to suppliers were delayed and supplies became restricted. A person having risen from grass roots and not the one to give up, Jagannath kept constant touch with his vendors assuring them safety of their investment and in the meanwhile putting in enhanced efforts to nurture his company to good health. By 2017, recovery had started. Sigma moving ahead acquired yet another Gidue like the one they had. 

Brotech Finishing

Here on, a more professional approach was put in place, targets planned and achieved, more ancillary equipment including a Chinese press 5 colors with UV and hot air in 2019 to print the liners for cores was added and the second Gidue like the one bought before was bought. Yet again mentions Jagannath that SMI was there to support him, he remains indebted to them. However, learning from past experiences, he sold the Multitec press so that he did not run into financial stress again. The one 1100 square feet shed had multiplied to become 4 sheds and continued growth had become a reality at Sigma. The first used Mark Andy 830 that he had, was given to a friend in Oman at low price to help him.

New office

In 2020 things became comfortable, Sigma moved from the four 1100 square feet sheds to a plush well planned 12000 square foot facility with well-furnished and equipped offices. 

Going Digital with Konica Minolta

They invested 5 million Dirhams adding a Konica Minolta, foiling equipment and Esko and Asahi plate making system. 

Reception of new premises

In early this year 2021 Jagannath decided that his company had to upgrade to latest equipment to be more efficient in production, he sold the first Gidue he had bought and replaced it with a brand new fully loaded Gidue M5. Jagannath has finally put Sigma on its road to success and bigger business, he attributes the his journey so far to the inspiration that he got from a Indian picture “Guru” based on the life of Dhirubhai Ambani the founder of Reliance Industries Ltd. He still quotes the dialogue from that film, “If I am doing well why not for myself ?”. 

The credit for this amazing journey largely goes to the woman behind Jagannath, his wife Pooja who solidly supported him right through, besides bringing up their only daughter. Pooja is a partner in the company holding the purse strings as the financial controller. No business succeeds without a good team Jagannath and Pooja carefully built their team as a family and took only people from grassroot levels and trained them, two of their teammates had joined as labour/helpers and now work as business development executive bringing in half a million Dirham business each. During their struggling days, Jagannath’s brother in law Kishor Vedpathak quit his job in Mumbai to come and support him, he now looks after Sigma as admin manager. Looking back, he reminisces that his first big break was when he got a big order for 100,000 price marking rolls from Centre Point Chain retail stores. He plans to enhance capacity again later this year with yet another flexo press plus another digital press. Up from just two employees when he started on his own, he now works with 55 employees including four designers inhouse, Sigma has registered a sale of 25 million Dirhams last year growing 30% in a pandemic year!

Jagannath in his new office

Deep in thought and with a smile he mentions that he wishes to be if not the biggest, he will try to be one of the biggest label printers in UAE in 5years time. He is confident that he will continue to lead Sigma Middle East Labels to keep rising to higher levels.

Written by Harveer Sahni, Chairman Weldon Celloplast Ltd. New Delhi June 2021

Print magazines my reproduce the above article by giving credit to author.

History of Indian Label Industry Part-2A

 At the last, Indian label industry event, “LMAI  Conference” in 2017 at Jaipur I promised to write the 2nd part of my first article titled  “History of the Indian Label Industry” which I wrote in 2006. It is available in this blog at https://harveersahni.blogspot.com/2010/08/history-of-indian-label-industry.html
I have now written the 2nd part. This is brief reporting so I plan to complete a book on the subject with a lot more expanded information in the near future. In a large country with industry spread over such a vast area and a huge population, it is difficult to chronicle all in few words. Being a long article, the part 2 of History of the Indian Label Industry will be posted on my blog in a series of four articles. The first part of series numbered  2A is as below;

Magnetic Cylinder and flexible Die

The first decade of new millennium was very eventful for the Indian label industry. After 2006 a global economic recession surfaced and kept growing, affecting businesses across the world. It even impacted many industries in India where we saw companies reducing manpower, which in turn affected spending in all segments of retail. Surprisingly while printers in India as well, were complaining of recessionary trends and difficulty in operations, yet the Indian label industry overall, continued to grow steadily. Capacity enhancement kept on being made, though it was a little reduced. The Indians became indulgent not only as label printers but also as diverse product and equipment suppliers to label printing companies. For the first time an Indian company Precise Graphics, later renamed PGI Technologies in 2005 produced a magnetic cylinder that worked on a label press. Dhiresh Ghosalia led Jesons, manufacturers of emulsion pressure sensitive adhesives for the label industry at their large factory in Daman, expanded and moved northwards in India and setup an additional manufacturing capacity at a 100,000 square feet facility in Roorkee. Kaygee Papers was promoted by Pranay Godha in 1997 to produce silicone coated release papers. In 2001 they made a Joint Venture, Kaygee Loparex Pvt. Ltd. with Loparex, a member of UPM group and world’s largest commercial Siliconiser. They continued to grow and became an important part of the Indian label industry in the first decade. In 2015 Loparex assumed 100% of the company and rechristened it as Loparex India Pvt. Ltd. In August 2007 Diehard Dies, based in Guntur Andhra Pradesh, started operations to become an indigenous manufacturer of flexible dies for the printing, packaging and label industry. By middle of 2019 Acme Rolltech a company led by 3 young entrepreneurs Parag Patel, Sandeep Sharma and Parag Koradiya started the first Indian facility manufacturing Ceramic Anilox Rolls. Sandeep, came to the partnership with 15 years of experience having worked with Avery Dennison, Kurz India and Domino Printech, Parag Patel and Parag Koradiya came from entrepreneurial background of manufacturing Gravure Cylinders. 

In 2007 the largest indigenous labelstock producer Ajay Mehta’s SMI Coated Products initiated an expansion program that would eventually place SMI as an undisputed leader in labelstock production by a wholly Indian owned company, not only in India but also in many international markets. They procured a 6540 square meter plot in MIDC, Ambernath near Mumbai, constructed 2200 square meter shed, shifted all plant and machinery from Daman to Ambernath, added two silicon coating machines and one Acrylic Coating machine. In 2014 they increased the production area by another 3000 square meters and installed a Hot Melt coating line, following it up by installing yet another hotmelt adhesive coater later.  

In 2017 they purchased the adjoining plot admeasuring 9820 Square meters, constructed 1000 square meters to install Schaeffer moving racks for better handling of an increasing volume of goods in their expanding stores. In 2019 they completed construction of another 3000 square meters shed and moved all coating machines to new premises along with a new emulsion adhesive coating tandem machine to do inline siliconizing and adhesive coating in a single pass, 1350 mm wide to run at a speed of 150 meters per minute, reaching an installed capacity of 19 million square meters per month. They celebrated their 25 years in grand style by hosting over 200 guests to visit their works besides take part in the celebrations. Other indigenous labelstock manufacturers also grew in their own respective regions. Stayon Papers and Sticon in Hyderabad, Million papers and NG papers in Chennai, Capri Coating Solutions in Mumbai, Shree Arihant, STP Paper, Gj Industries and many more in Delhi were some of the active and visible manufacturers. Some of the earlier leaders in the Labelstock manufacturing segment pulled back or shifted focus in view of depleting margins, intense competition and unviable credit terms.

Indian label press manufacturers transformed in this period to produce label presses that were comparable to international products and made their mark not only in India but internationally as well. Amit Ahuja led Multitec is the front runner who had exhibited their first modular rotary flexo label press in partnership with Abhay Datta of Datta Press Delhi at the first India Label show in 2002 at Nehru Centre Mumbai. The association of Multitec with Datta came to an end around 2008. Multitec redesigned their label press as a competitive product with all basic features. After renaming the press, “Ecoflex” they relaunched it. Two year hence they launched yet another version of their label press and continued to upgrade their offerings and grow phenomenally. By the end of 2018 they had achieved outstanding success producing label presses from a quality accredited design and a fully integrated manufacturing facility spread over 26,000 square meters. At the time of writing this article their website reports having sold over 300 Label presses to over 25 countries through a team of agents spread across the world. Other Indian press manufacturers who also made their mark are mostly from Faridabad, south of Delhi, the same city as Multitec. They are Alliance Printech, Webtech Engineering, NBG Printographic Machinery Co. Pvt. Ltd., M Tech Industries, etc. Other than these, Ahmedabad based RK label machines claimed to have sold 150 rotary plus 600 flatbed label presses and Noida based Jandu Engineers had sold about 135 rotary flexo presses. Jandu is also a leading manufacturer of coating and laminating machines and has a large presence amongst local labelstock manufacturers and according to Baldev Singh Jandu, they have till date sold over 150 coaters.

The Indian label market was growing at a steady double-digit growth rate and interest of international label fraternity in India also kept on growing with it. Avery Dennison who had found success in the country had in 2007 invested in land admeasuring 22 acres at Ranjangaon near Pune for expansion. In 2008 the facility was with a one-meter wide hotmelt coater having capability to run at 500 meters per minute with inline silicon coating, this compared to the first one-meter coater at Gurgaon that could run at 250 meters per minute. The then global CEO and President of Avery Dennison Corporation Dean Scarborough specially flew in to inaugurate the facility. In 2010 Raj Srinivasan who had established Avery’s foothold in India returned to USA handing over reigns of the Indian operations to Anil Sharma. New wave of professionalism descended in the working of Avery; more expansion followed with installation of a 1.5 meters hot melt coater in 2011 at Pune. In the same year a slitting facility was commissioned in Bangalore in 2011 to serve the southern customers effectively. To help the cause of a limited number of trained press operators in India in face of a growing label press population,  Avery Dennison Knowledge Centre was also set up in Bangalore to train people for becoming press operators, but later in 2018 the centre was moved to Pune, next to their research and development centre. In 2014 an emulsion coater of 1.5meter width was added at the Pune facility. In 2015 Anil Sharma was elevated for bigger responsibilities and handed over charge to his teammate Pankaj Bhardwaj. Amongst international Labelstocks companies UPM Raflatac had established a substantial foothold with their slitting facilities in India while Lintec, Ritrama, flexcon and a few others sold through agents or directly.

Increase in number of visitors to labelexpo Europe in Brussels was a positive indicator of a growing label market in India and the interests of printers to invest in globally acknowledged label presses. In 2005 Weldon Celloplast Ltd. was the lone Indian exhibitor and by 2011 edition of the show, the number of Indian exhibitors had swelled to fourteen, up from four in the previous show in 2009. At Labelexpo Europe 2009 there were 338 Indian visitors and this figure had swelled to 429 in 2011. The number just went on increasing, there were more Indians then before at successive labelexpos.

In 2007 at Labelexpo Europe in Brussels Tarsus announced their acquisition of India Label show, a show that was set up by Anil Arora and his wife Neetu Arora. The next edition of India Label show 2008 in New Delhi’s Pragati Maidan was held in the aftermath of terrorist attack in Mumbai and in the middle of a huge recession, yet the show stood its ground proving the strength of growing Indian label market. In 2010 the show was rechristened as Labelexpo India. The show owners Tarsus UK made a strategic alliance with Indian Label association LMAI for the event and to have an awards night and a gala dinner organised by Tarsus at every Labelexpo India. LMAI was to conduct the LMAI label awards which became a regular feature thereafter. In 2009 under the leadership of Vivek Kapoor, the longest serving president of LMAI who completed 3 terms of 2 years each, it was also planned to hold biennial LMAI conference in alternate years, the trend has carried on till date. The first LMAI conference was held in Hotel park Hyatt Goa in 2011 and the event grew to be held again in 2013 at Grand Hyatt Goa and at Hotel Jaypee Palace in Agra in 2017. 

In 2010 leading global associations came together under the aegis of FINAT and formed the federation of global associations called L8. Later with one more association joining it was renamed L9, the confederation of nine leading international label associations. The alliance consisted of LMAI (India), JFLP (Japan), FINAT (Europe), TLMI (North America, LATMA (Australia), PEIAC (China), AMETIQ (Mexico), ABIEA (Brazil) and SALMA (New Zealand). Sandeep Zaveri of Total Prints took over the presidentship of LMAI in 2015 and handed over the charge to Kuldip Goel of Any Graphics in 2017.  At the 2017 conference in Agra 550 delegates attended making it the largest gathering of label printers at a single conference. A proud moment for me at the Agra conference in 2017 came when I was announced as the first and only recipient till then of a lifetime award for support to the Indian Label industry.  

In 2016 Labelexpo was moved to the Expo Mart in Greater Noida outside Delhi, a part of Delhi NCR (National Capital Region) due to non-availability of dates at New Delhi’s Pragati Maidan. In 2018 also it was held at the Expo Mart as the venue, Pragati Maidan in Delhi, was under redevelopment. In 2018 for the first time LMAI hosted a very successful L9 meet in India on the sidelines of Labelexpo India.

The evolution of label industry in India has been a continuous process, from the earliest days of screen-printed labels in sheeted format in the 1970s to roll form labels to be converted on very narrow width flatbed Japanese presses and then over to rotary flexographic printing label presses in the early 1990s. Until the end of 1990s the flexo printing process used water-based inks with hot air drying. The polymer plate making technology was also evolving. The process was evolving but it had shortcomings. It was faster than the flat bed machines but lacked consistency due to drying and viscosity changing issues. Better prepress and improvements in platemaking technologies brought flexo printing to almost at par in quality to offset printing. This led the rapid growth in flexographic label printing. As demand escalated, investments in equipment also witnessed increase with printers demanding wider presses for increased productivity and reduced wastages. By end of the last century UV curable inks became available and changed the way flexo printing grew. Originally, UV technology was introduced to the world in the 1960s. The drying effect for water-based inks is brought about by evaporation of volatile components. The required energy is supplied via IR-radiation and/or hot air. A loss in the dried coating thickness will appear depending on the amount of the evaporated components. The volatile components must be removed by an extraction. However, in case of the UV inks, the drying effect is due to polymerization, i.e. on cross-linking of long molecular chains. The energy required for cross-linking is supplied via UV radiation. For 100 % solid body systems the thickness of the dry coating corresponds to the thickness of the wet coating. There are no losses due to evaporation. By 2010 new UV inks came with enhanced ink transfer properties as well as faster reactivity to UV curing, meaning speeds over 200 meters/min. were achievable. Towards end of 2009 the conventional UV started to evolve to low power consuming LED UV with longer life lamps that had surfaced internationally, though the system had yet to be widely accepted in India due to non-availability of parts and inks, but it was being investigated and expected to grow substantially in demand or replaced on existing presses.  Some of the international equipment manufacturers had already introduced alternatives such as LED UV and even Electron Beam curing technology as an alternative. From the middle of first decade of 21^st century onwards there grew a demand for high end hybrid presses with increased features like automatic registration, multiple printing processes for combination printing and decoration capabilities. As sustainability and environmental concerns became an imperative; waste reduction, and waste management became a necessity when an investment in equipment was being made.

End of Part 2A, To be continued…

The remaining parts will be posted in gaps of 7-10 days 

Note: No one is authorised to reproduce, copy or reprint this article until permitted by the author in writing. 

Written by Harveer Sahni Managing Director Weldon Celloplast Limited New Delhi July 2019

Cosmo Films: Working their way into specialty films for labels

Ashok Jaipuria

Ashok Jaipuria led Cosmo Films Limited, headquartered in New Delhi, is one of the largest manufacturers of BOPP (Biaxially Oriented Poly Propylene) films in the world. According to Wikipedia they are in fact the largest manufacturer of thermal lamination films in the world. Ashok Jaipuria is prided with his lineage from an elite Marwari family (people from the Marwar region of Rajasthan).   Ashok is the only son of his father Late Sri Sitaram Jaipuria, who was an Industrialist and Promoter of Swadeshi Polytex Limited,  Swadeshi Cotton Mills Limited and was a member of the Upper House of the Parliament of India. Ashok started his own firm Cosmo Films in 1976 with an objective to manufacture and market BOPP films. He qualified in Business Administration and Marketing Science in the year 1973. BOPP film was a licensed item those days, visualizing growth and opportunity in this nascent area; he applied for and acquired the license to manufacture it. He setup and commissioned his first BOPP production line in 1981 at Chikalthana, Aurangabad. Being one of the first entrants to produce BOPP in India, the initial years were very tough, more so because customer awareness did not exist and educating them on the product was a challenge. Print lamination and self adhesive packaging tapes were the first target segments for this product. Once settled, there was no looking back, they commissioned their second production line at Waluj, Aurangabad in 1988 and third line also at Waluj in 1996.

Entering the new millennium, Cosmo Films was steadily growing, so was the market for

Cosmo Films Vadodara Unit

BOPP and also the market share of Cosmo for BOPP films. With a positive situation prevailing, they became bullish and registered unprecedented growth in this decade.  In 2001 they commissioned their fourth line and a year later in 2002 they acquired Gujarat Propack Limited, the Karjan Vadodara based BOPP manufacturer which became their fifth BOPP line. In 2003 the sixth line was commissioned and in the very next year in 2004 they decided to go for specialties in BOPP by adding a metalizer, an extrusion coating plant and yet another BOPP line taking their total count to seven. Expanding on coated products, they commissioned their second extrusion coating line in 2005. Encouraged by the success, Cosmo added five more extrusion coating lines. Two were added in 2006, one in 2007 and two more in 2008. Extending their footprint globally, in 2009 they acquired USA headquartered GBC’s Print Finishing Business from Acco Brands Corporation USA. Also in 2009 they enhanced their BOPP production capacity with yet another line at Vadodara, taking the total to 8 lines. 

Cosmo Films Hagerstown USA

They wrapped up the decade by installing their 2^nd metalizer at Karjan, Vadodara. In the second decade of the millennium Cosmo continued on their growth path. Pankaj Poddar also of Marwari descent, a qualified Chartered Accountant, took charge as the CEO of Cosmo Films in 2011. In the ensuing years a new plant was commissioned with their existing eighth extrusion thermal coating line in South Korea. Two more BOPP lines in Aurangabad SEZ and Karjan Baroda were added in subsequent years taking the total BOPP production lines to ten. In addition, they have five coating lines, three metalizers and one CPP (Cast Polypropylene) line. When the first line was commissioned Cosmo’s capacity was only 850 tons per annum, which now has reached 2,00,000 tons from five different locations that include three in India, one in Korea and one in USA, the biggest facility being the one in Vadodara. The production in India spreads over 100 acres of land with 850 permanent employees. Even though volume growth of BOPP was coming from packaging and lamination yet the business had sometime along the way started to get competitive. To maintain their leadership and profitability, they had in the 1990s, shifted focus to specialties in films and label films for wrap around labels, IML (that had started evolving) along with limited presence in self adhesive labels.  Out of their initial endeavours, white film for Parle and production of synthetic paper was vital in their rapid growth. 

With Pankaj Poddar at helm, the company became more aggressive especially in the label segment. The label segment comprising of self-adhesive labels, wrap around labels and IML is continuously growing in volumes. They supply these films worldwide with some sales also in China. Today leading Indian Labelstock and other label producers use Cosmo’s products for labels. Label films continue to become a substantial part of the company’s product offerings these are now around 15% of their total production. Cosmo has invested in creating the right products to facilitate top of the line decorative packaging. Their offerings include films that are white opaque pearlised, transparent, solid white, gloss/matt metalized, etc. Their films have a clean surface, have excellent gloss, high clarity and can be printed by different print technologies that include printing by using Water based inks, UV inks, Gravure inks, Thermal transfer ribbon printing and some Digital print processes. According to Pankaj, while the domestic BOPP market is growing at around 10 % per annum, the growth is slightly more in self adhesive labels and IML, yet Cosmo is registering a growth rate above this due to their increasing exports. They are committed to diversify more and more into the specialty segments due to depressed margins of commodity products in a competitive scenario. They will soon be launching direct thermal printable film and paper. Being firmly committed to maintain their leadership, for them delivery of quality and innovative products is a priority. They have invested more than 1.50 Million US$ in their new Research and Development/Innovation centre. The centre has capability to analyse the entire film’s chemistry viz. surface, polymer and chemical analysis.  The centre is also capable of testing all properties of the film right from its concept stage way upto its end applications.  Centre can also conduct in house  printing tests with diverse processes like Screen, UV flexo, Gravure printing, Direct Thermal and Thermal Transfer Printing.

Pankaj is emphatic that BOPP consumption will continue to grow at a fast pace, but he wishes to see Cosmo diversify more into specialty segments. They will also be adding a Cast Poly Propylene film (CPP) and metalized CPP film line in 2018; they will also be installing a PET film line. Both product lines will be packaging and label centric. PET will be majorly offered as label face or later for release liner applications. PET liners can reduce the adverse impact of liner waste on the environment by bringing down the tonnage of liners using thinner liners. While most of the present paper siliconised liners go to landfills, PET liners can be recycled. Capacity enhancement for synthetic paper is also on cards. Their biggest competition at global level comes from Jindal Poly films subsequent to their acquisition of Exxon Mobil’s BOPP films division and from Innovia films. However still, Pankaj says, “We will be enhancing capacities. As for specialties, we have no real competition”. Pensively and hesitantly he does agree that digital printing direct on product that will eliminate the substrate maybe a challenge but he is confident it will not affect Cosmo’s growth plans.

Pankaj Poddar

Pankaj Poddar is an alumnus of Delhi’s Shri Ram College of commerce (SRCC). After finishing his B.Com at SRCC, he completed his articles to be a qualified CA and then completed his degree in MBA from IMT Ghaziabad. He worked with Ernst and Young for 7 years, for automotive parts company Delphi for 5 years two years each with Reckitt Benckiser and Avon Beauty Products. He comes from a traditional Marwari business family, his father dealt with heavy earthmoving machinery spare parts, brother traded in air-dryers and chilling plants and sister’s husband supplies alloy metal to auto parts companies. Moving away from the tradition Pankaj preferred to be a professional executive. His wife is a dietician and they are blessed with two school going children, a son and a daughter. When he joined Cosmo, the turnover of the company was Rupees 850 Crores (130Million USD) and it has now reached Rupees 1900 Crores (300 Million USD). He was awarded as “Indian CEO of the year” by ABCI, Association of Business Communicators of India at their “Brand India Summit” in 2016.  When Pankaj took charge, Cosmo Film’s share was trading at Rs.80-90 and now it has reached Rs.350-400.

Cosmo Films is an environmentally conscious company and continues to make strides in implementing eco friendly measures.  All coatings on their films are water based and they support water based ink printing for conversion of their films. They are an ISO: 14001 certified company. The waste water in all their plants, after effluent treatment, is used for gardening. All plant sites have water harvesting. Natural lighting is used wherever possible. They plan to initiate a solar power plant at their Vadodara site as a first experiment and if found successful, they will replicate in other sites as well. Every employee in their organization has to undergo training. As a part of their corporate social responsibility, they work on supplementing basic education provided to young children in government schools in and around their plants through various sustainable programs like Computer Literacy, basic English Learning, basic reading, writing, and arithmetic skills. They have trained about 150 rural youth as qualified teachers to be able to execute this and till date more than 25000 students have benefitted from these programs.

Pankaj feels in 5 years Cosmo’s turnover will more than double up from the present 300 million US Dollars to 600-700 US Dollars. This he states will be just from the ongoing organic growth. However if they install more projects and happen to acquire some businesses, the turnover may reach USD 1 billion. The present share of specialty films in the company portfolio is around 40%, he hopes and wishes to increase this share to 60% so as to keep adding value to its bottom line.

Written for Packaging South Asia magazine by Harveer Sahni Chairman, Weldon Celloplast Limited, New Delhi, December 2017.

Print Publications wanting to reproduce may do so by giving credit to the author Harveer Sahni and by mentioning that it is published in arrangement with "Packaging South Asia"

My Pictorial walk through an amazing Labelexpo 2017!

Add caption

Labelexpo Europe 2017 at Brussels has been the biggest ever edition in the event's history so far. The show that is primarily dedicated to self adhesive labels industry has now evolved to  different segments of labels and into the larger world of print packaging. Evidently the show will continue to become bigger in the years that follow. As per information from Tarsus, the show occupied nine exhibition halls to be 12 percent bigger than the previous edition in 2015. It hosted 679 exhibitors, including 198 new participants. There was 25 percent more working machinery demonstrated at the show, including a number of product launches. Labelexpo Europe attracted large delegations from Brazil, China, India and Japan, the show reported 37,724 visitors; an increase of 5.6 percent on 35,739 visitors to Labelexpo Europe 2015. There were a number of sales recorded on the show floor.

I reproduce here images from my pictorial walk through this amazing show and the events organised on the sides and attended by me.

The Omet Agents Dinner one day prior to Labelexpo

Harveer Sahni and Amit Sheth as Judges at World Label Awards

  

Judging in progress for World Label awards













Chinese Press Manufacturers Weigang, stand

With Mike Russel International Sales Director Mark Andy

Mark Andy/Rotoflex Stand

With Dirk Schroder, Sales Manager E+L displaying their intelligent inspection system

With Pankaj Bhardwaj Vice President and General Manager, South Asia Pacific and Sub Saharan Africa of Avery Dennison, India at their stand.

At the The Label Industry Global Awards Night and Gala Dinner, Tony White announcing the "Best of the Best" in World Label awards heldon the sidelines of Labelexpo Europe!

LMAI (India's label association) President Kuldip Goel and Vice President Rajesh Nema with Labelexpo Managing Director Lisa Milburn.

Professor Tan Junqiao receiving the receiving the Stanton Avery Lifetime achievement award from Georges Gravanis, President, Label and Graphic Materials, Avery Dennison and Mike Fairley

With Douglas Emslie, Tarsus Group Managing Director

 







With FINAT President Chris Ellison, FINAT events and communication manager Jakovina and LMAI Vice President Rajesh Nema

With Jules Lejuene, Managing Director FINAT

FINAT President in meeting with Mike Fairley at the "Label Academy" Stand

Networking at Dinner hosted by Lisa Milburn for Industry friends and colleagues around the world

Jakob Landsberg Sales Director of Nilpeter with Niklas Olsson Global Brand Manager of Flintgroup

With Lisa and Mike Fairley at the dinner

SMI Team at their Stand

Amit Ahuja Multitec

The Gallus Stand

With Lars and Peter Eriksen of Nilpeter

Kocher + Beck Stand

Karan Reddy of SticOn papers Hyderabad

Tapan Patel of BST Eltromat

John of Orthotec

Bobst Stand

Gavin Rittmeyer of Martin Automatic

MPS Stand

Kapil Anand of Cosmo Films

Marco Calcagni of OMET

Spilker Team

The Sahnis with Paolo Grasso, Omet

No Labelexpo at Brussels is complete without having spent a casual fun evening at the Grand Place!!!

Compiled By Harveer Sahni, Chairman, Weldon Celloplast Limited, New Delhi October 2017